DIRECTIONS FOR USE:
1. Pre-rinse your vehicle: Before applying the car shampoo, pre-rinse your vehicle with water to remove any loose dirt or debris. This step will help ensure that the car shampoo can work more effectively to lift and encapsulate the remaining dirt and grime.
2. Dilute the car shampoo: Dilute the car shampoo according to the type of foam applicator you are using. For manual washing, dilute 10 mL of car shampoo per liter of water. For a foam machine, dilute 20 mL of car shampoo per liter of water. For a foam lance, dilute 200-300 mL of car shampoo per liter of water for best results. Mix the car shampoo and water in a suitable container and stir until fully combined.
3. Apply the car shampoo: Using a foam cannon or foam gun, apply the car shampoo to your vehicle. Start at the top of the vehicle and work your way down, making sure to cover all surfaces thoroughly. Avoid applying the foam to hot surfaces, as this can cause the product to dry out too quickly and reduce its effectiveness.
4. Allow the car shampoo to dwell: After applying the car shampoo, let it dwell on the surface of your vehicle for around 5 to 10 minutes. During this time, the foam will work to break down and lift dirt and grime from your vehicle’s surface.
5. Rinse off the car shampoo: Finally, rinse off the car shampoo with a high-pressure hose or pressure washer. Make sure to rinse off all the foam, dry your vehicle with a microfiber towel to prevent water spots.

PACKAGING:
CAR SHAMPOO HIGH-FOAMING is available in 1L round bottle, 3.4L round gallon, and 20L black carboy HD.

STORAGE & CONDITION:
Store in a cool, dry, and well-ventilated place where temperatures do not exceed 30°C. Keep the container tightly capped and in an upright position when not in use. Keep away from direct sunlight.